Showing posts with label jumper. Show all posts
Showing posts with label jumper. Show all posts

Monday, 17 June 2013

Classic 60s polo neck sweater

Steve Winwood in the original sweater
As usual I've been too busy knitting to write up my patterns - I really must make more effort! This sweater was made for a friend who's very much into the 60s Mod look, even though he's about 25 years too young to remember it! He'd asked me if I could make him a sweater like one he'd seen Steve Winwood wearing in a photo taken in about 1965, when Steve was with the Spencer Davis Group. (Who else remembers them? Come on, own up!). 
I've made a couple of minor changes - it looks as though the original was in Aran/worsted weight, which was a little heavy for Paul if he wanted to wear it on stage (he's the guitarist in a 60s tribute band, The Beat Rooms), so I used Jarol Heritage DK, which has a high wool content and is therefore more authentic than synthetic fibres. I also changed the shoulder line slightly as the dropped shoulder of the original would be uncomfortable under a jacket. Here's the pattern - it's very simple, with a cable repeat every 14 rows on both front and back.

Please note error in sleeve pattern now corrected 6 March 2014

Classic 1960s polo neck sweater


 
My version of Steve's sweater

Materials:


700g Jarol Heritage DK – I used shade 100 Cream.

Pair size UK 10/3.25 mm needles

Pair size UK 8/4 mm needles

Set of size UK 9/3.75 mm double point needles for polo collar

Cable needle

2 stitch holders or spare needles



Measurements:


To fit chest 40” to 42” (actual measurement 44”)

Length 28”

Sleeve seam 19” plus turnback cuff

Back width across shoulders (between sleeve set-in seams) 16”



Tension:


22 sts and 30 rows to 4” measured over stocking stitch on 4 mm needles.

Abbreviations:


K
knit
K2in
Inc 1 st by knitting into back and front of same st
P
purl

st st
stocking stitch
rem remaining
patt pattern RS right side
tog together WS wrong side
st(s) stitch(es) C8F slip next 4 sts onto cable needle, place at front of work, K next 4 sts, then K 4 sts from cable needle
inc increase
dec decrease
alt alternate




Back:


Using 3.25 mm needles, cast on 119 sts and work 3” (22 rows) rib as follows:

1st rib row: (K1, P1) to last st, K1.

2nd rib row: K1, (K1, P1) to last 2 sts, K2.

Inc row: Rib 4, (K2in, rib 11) 9 times. K2in, rib 6 (129 sts).

Change to 4 mm needles and work 14 row cable pattern as follows:

Marker added on cable row
1st, 3rd and 5th (RS) rows: (K35, P2, K8, P2) twice, K35

2nd and alt (WS) rows: (P35, K2, P8, P2) twice, P35

7th row: (K35, P2, C8F, P2) twice, K35 – place a marker on this row (a length of contrasting yarn will be fine).

9th, 11th and 13th rows – as 1st.

Repeat these 14 rows until work measures 18” or desired length to start of armhole decreasing. Move the marker to each new cable patt row as you work it.
Armhole shaping: Keeping continuity of cable pattern, cast off 4 sts at start of next 2 rows. Dec 1 st at each end of next 7 rows, then each alt 6 (RS) rows (95 sts rem).

Work straight until work measures 9½” from start of armhole decreasing, i.e. 27½” in total.

Shoulder shaping: Cast off 9 sts at start of next 4 rows, then 10 at start of nest 2 rows. Place rem 39 sts on stitch holder for neck.


Front:


Work as for back to end of armhole shaping. Work straight until work is 18 rows shorter than the back to start of shoulder shaping, thus ending with a WS row.

Divide for neck: Work 35 sts, turn, P2 tog and work to end. Working on these 34 sts only, dec 1 st at neck edge on next 3 rows, then on next 3 alt (RS) rows (28 sts).

Work 7 rows straight. With RS facing, cast off 9 sts at start of next and foll alt rows. Work 1 row. Cast off rem 10 sts.

Place centre 25 sts on stitch holder. Rejoin yarn to rem sts and complete other side of neck to match.



Sleeves (make 2 alike):


Using 3.25 mm needles, cast on 59 sts and work 5” (40 rows) rib as for back. If you prefer to omit the turnback, work 3” (22 rows).

Inc row: Rib 5, (K2 in, rib 7) 6 times, K2 in, rib 5 (66 sts).

Change to 4 mm needles and. working in st st throughout, inc 1 st (K2 in) at each end of 7th row and each following 8th row until there are 92 sts.

Work straight until work measures 21” (or 19” if you are omitting the turnback).

Shape top: cast off 4 sts at start of next 2 rows. Dec 1 st at each end of next and foll alt (RS) rows until there are 40 sts left. Dec each end of every row until 28 sts are left.

Cast off 3 sts at start of next 2 rows. Cast off rem 22 sts.
Back of sweater also has cable pattern


Polo collar:


Join shoulder seams.

Using 3.75 mm dpns or circular needle, and starting at left shoulder seam, pick up and knit 22 sts down left front neck, K across 25 sts from centre front, pick up and K 22 sts up right front neck, and finally K across 39 sts from back neck (108 sts). Work 6½” K1, P1 rib. Cast off loosely – use a needle 1 or 2 sizes larger.




Finishing:


Press pieces according to ball band instrucions. Set in sleeves, then join side and sleeve seams. Don't forget to stitch the lower 3” of the sleeve ribbing from the other side, as the cuffs will be turned back in wear. Press seams.





Wednesday, 20 February 2013

Mitred pocket toddler dress




I designed this little dress and made it in machine washable acrylic yarn, for my granddaughter to wear over a top and tights or leggings. It would be suitable as a sundress if knitted in cotton – I might try it if we ever get any warm weather!
I made the 22 inch size – Elanor is 2½ and quite tall for her age, but by increasing the needle size the pattern would be suitable for the average four-year-old. 
This yarn is Supreme DK from my local B & M store, but any suitable yarn which knits up to the same tension will be fine.

Materials:

100% acrylic DK as follows:
150g main colour
25g contrast 1
20g each contrasts 2 and 3
2 x ½ inch (12mm) buttons
For 22 inch size: Pair each 3.75mm (UK9) and 3.25mm (UK10) needles
For 24 inch size: Pair each 4mm (UK8) and 3.75mm (UK9) needles
3.5mm crochet hook

Tension:

22 inch size: 24 sts and 32 rows to 4 inches measured over stocking stitch on 3.75mm needles
24 inch size: 22 sts and 30 rows to 4 inches measured over stocking stitch on 4mm needles

Measurements:

To fit age 2/3 (3/4)
Sizes 22 (24) inches approx.
Actual measurements:
Chest 23½ (25½) inches
Length 20½ (22) inches

Abbreviations: 

K       knit 
P        purl 
g st    garter stitch (every row K) 
st st   stocking stitch 
tog     together
st(s)   stitch(es)
S1      slip one without knitting
psso   pass slipped stitch over
RS      right side
WS     wrong side
MC     main colour
C1      first contrast
C2      second contrast
C3      third contrast
dc      double crochet
rem    remaining
alt      alternate

Back:

With larger needles and C1, cast on 114 sts and work in g st as follows, joining in contrast colours as required and carrying MC up side of work when not in use: 2 rows C1 (green), 2 rows MC (purple), 4 rows C2 (pink), 2 rows MC, 4 rows C3 (peacock).
Change to MC and, working in st st, continue as follows:
First dec row: (S1, K1, psso, K34, K2tog) 3 times. Work 11 more rows in st st.
Second dec row: (S1, K1, psso, K32, K2tog) 3 times. Work 11 more rows in st st.
Continue in this manner, reducing the number of stitches between decs by 2 each time, until there are 72 sts rem on needle, ending with a WS row.
Note: Work should measure about 11 inches for smaller size, about 12 inches for larger size.
Change to smaller needles and work in g st for waistband as follows: 4 rows C1, 2 rows MC, 4 rows C2, 2 rows MC, 4 rows C3.
Change to larger needles and work 20 rows in MC in st st.
Armhole shaping: Cast off 4 sts at start of next 2 rows, then dec 1 st at each end of the next 5 rows and each following alt (RS) row 3 times, until 48 sts remain.
Work 31 rows straight, thus ending with a WS row.
Divide for neck: K 14, K 2tog, turn, P 15. Working on these sts only, dec 1 st at neck edge on next row. P 1 row.
Shoulder shaping: Cast off 7 sts at start of next row, work 1 row, then cast off rem 7 sts.
Place centre 16 sts on a stitch holder or large safety pin. Rejoin yarn to rem 16 sts, dec 1 st at neck edge on next and foll alt row. Work 1 row (WS facing), cast off 7 sts at start of next row. Work 1 row then cast off rem 7 sts.

Front:

Work as for Back as far as end of armhole shaping. Work 15 rows straight in MC in st st.
Divide for neck: K 17, K 2tog, turn.
Next row: P 2 tog, P to end. Continue to dec at neck edge of each row twice more, then on alt (RS) rows only twice (14 sts)
Work 13 rows straight, thus ending at armhole edge.
Shoulder shaping: Cast off 7 sts at start of next row, work 1 row, then cast off rem 7 sts.
Place next 10 sts on a safety pin. Rejoin yarn to rem 19 sts. Dec 1 st at neck edge on next 3 rows, then on next 2 alt rows.
Work 14 rows straight, then cast off as for first shoulder.

Neck edging:

Join right shoulder seam. With smaller needles and C1 (green), with RS facing you, pick up 20 sts down left side of front neck, K across 10 sts from safety pin at centre front, pick up 20 sts up right side of front neck, then 5 sts from right side of back neck, K across 16 sts from safety pin at centre back neck, and pick up 5 sts from left back neck (76 sts).
Work 3 rows g st. Cast off using larger needle.

Armhole edgings:

Join left shoulder seam for ½ inch only, leaving it open at neck. With smaller needles and C1 (green), with RS facing you, pick up 84 sts evenly along armhole edge. Work 3 rows g st and cast off. Finish second armhole to match.
With MC and crochet hook, work 1 row dc along both sides of left shoulder opening, working 2 chain buttonholes on front, one being on the neck edging and the other about halfway along the shoulder edge.

Pockets (make 2):

Worked in g st throughout.
With larger needles and C1 (green), cast on 44 sts and work as follows, using colour sequence below:
Foundation row: S1, K1, psso, K to last 2 sts, K 2tog.
Next row (RS): K 19, K 2tog, S1, K1, psso, K 19.
Next row: (WS) K
Next row: K 18, K 2tog, S1, K1, psso, K 18.
Next row: K
Continue in this manner, working 1 less st each side of the centre double dec, until 4 sts remain.
Next row: K 2tog, S1, K1, psso
K 2 tog and fasten off.
Colour sequence for pocket:
Foundation row and next row C1 (green), then
2 rows MC (purple)
4 rows C2 (pink)
2 rows MC
4 rows C3 (peacock)
2 rows MC
4 rows C1 (green)
Repeat this sequence throughout.

Finishing:

Press lightly on reverse according to ball band instructions.
Join side seams and sew on 2 buttons to correspond with buttonholes. Position pockets with a cast on edge at the top and stitch in place.

Wednesday, 23 January 2013

Sweater with shirt collar and cable trim

Well, the bad weather's finally arrived, a great excuse to stay in the warm and knit! I finished this sweater before Christmas and have worn it several times already - I wanted something reasonably warm but not too bulky to wear indoors. I also hate crew necks - they really annoy me - so I came up with this design with a shirt-style collar. The cable trim is enough to stop the design being totally boring to knit, but it was still finished in just over a week. 



Materials: 

500g 100% acrylic DK
(I used Woolcraft New Fashion in Shade 723 Imperial – a bright purple which looks more blue in the photos!))
Pair each 3.25 mm, 3.75 mm and 4 mm needles, plus one 4.5 mm needle for casting off collar
Cable needle
Stitch holder
3 large safety pins or nappy pins
3 x 12 mm buttons

Measurements:

To fit chest/bust 40–42 in (actual measurement 44 in). Length 26 in, sleeve seam 16 in.

Tension:

22 sts and 30 rows to 4 in over st st

Abbreviations:

K         knit
P         purl
st st    stocking stitch 
patt   pattern
tog     together
st(s)   stitch(es)
inc     increase
dec    decrease
RS      right side
WS     wrong side
rem    remaining 
C4B    Slip next 2 stitches onto a cable needle and leave at back of work. K2, then K2 from cable needle.
C4F    Slip next 2 stitches onto a cable needle and leave at front of work. K2, then K2 from cable needle.
T4B     Slip next 2 stitches onto a cable needle and leave at back of work. K2, then P2 from cable needle.
T4F     Slip next 2 stitches onto a cable needle and leave at front of work. P2, then K2 from cable needle.

First pattern panel:

1st row: P3, C4B, P4, C4B, P3
2nd row: K3, P4, K4, P4, K3
3rd row: P1, (T4B, T4F) twice, P1
4th row: K1, P2, K4, P4, K4, P2, K1
5th row: P1, K2, P4, C4F, P4, K2, P1
6th row: as 4th row
7th row: P1, (T4F, T4B) twice, P1
8th row: as 2nd row

Second pattern panel:

Work as for first pattern panel, reading C4F for C4B and vice versa throughout.

Back:

Using 3.25 mm needles, cast on 133 sts and work 3 inches in K1, P1 rib.
Change to 4 mm needles and work as follows:
1st row: K26, work 18 sts of first pattern panel, K45, work 18 sts of second pattern panel, K to end.
2nd row: P26, work 18 sts of first pattern panel, P45, work 18 sts of second pattern panel, P to end.
Repeat these two rows until work measures 16 inches, or desired side seam length, ending with a WS row.
Shape armholes: Dec 6 sts at start of next 2 rows, then dec 1 st at each end of the next 7 rows. Dec 1 st at each end of the next 10 RS rows (85 sts).
Continue until work measures 9.5 inches from start of armhole decreasing, ending with a WS row (25.5 in total).
Shape shoulders: Cast off 8 sts at start of next 6 rows. Place rem 39 sts on stitch holder for collar.

Front:

Work as for back to start of armhole shaping.
Shape armholes and divide for neck: Cast off 6, K20, work 18 sts of 1st patt panel, K19, turn. Working on these sts only, work to end of row.
**Dec 1 st at armhole edge on next 7 rows, then foll 10 RS rows (40 sts).
Work straight until you have completed 12 rows less than back to shoulder dec (11 rows less on other side of front). On next (RS) row, work to last 8 sts, place these 8 sts on a safety pin, turn and dec 1 st at neck edge at start of next row.
Dec 1 st at neck edge on next 4 rows and foll alt 3 rows. Work 2 rows straight. Cast off 8 sts at start of next and foll alt row, work 1 row. Cast off rem 8 sts.
Place next 7 sts on needle onto a second safety pin. Rejoin yarn and work to end.
Next row: Cast off 6 sts at start of next row. Work rest of front as for first side from **.

Right sleeve

With 3.25 mm needles, cast on 59 sts and work 3 inches in rib as for back, working 1 row less than for back.
Inc row: Rib 6, (inc in next st, rib 3) 13 times, rib 1 (72 sts).
Change to 4 mm needles. Next row: K 27, work 18 sts of 1st patt panel, K27
Next row: P27, work 18 sts of 1st patt panel, P27.
Continue in this manner, inc 1 st at each end of the 9th and every foll 8th row until there are 96 sts. Work stright until work measures 16 in or desired sleeve length.
Shape top of sleeve: Cast off 6 sts at start of next 2 rows. Dec 1 st at each end of next 7 rows, then following alt (RS) rows until there are 40 sts.
Dec 1 st at each end of every row until there are 28 sts. Cast off 3 sts at start of next 2 rows. Cast off rem 22 sts.

Left sleeve

Work exactly as for right sleeve, but use the second patt panel instead of the first.

Button band

With 3.25 mm needles, cast on 9 sts. 1st row: K1, (P1, K1) to end. 2nd row: K1, (K1, P1 to last st, K1.
Repeat these 2 rows until the work measures 7.5 inches. Place sts on safety pin.

Buttonhole band

Place 7 sts at centre of front onto 3.25 mm needles with WS facing.
Next row: K2, (P1, K2in) twice, K1 (9 sts)
Next row: K1, (P1, K1) to end.
Rib 16 more rows.
1st buttonhole row: Rib 3, cast off 3, rib 3
2nd buttonhole row: Rib 3, turn and cast on 3, turn and rib 3.
(Rib 18 rows and work 2 buttonhole rows) twice. Rib 2 rows. Do not break yarn or remove from needle.

Collar

Join shoulder seams.
With RS facing, using 3.25 mm needles, rib across 9 sts on needle at top of buttonhole band, K across 8 sts from safety pin at right front neck. Pick up and knit 20 sts up shaped edge of right front neck, K across sts from holder at back neck, pick up and K 20 sts down shaped edge of left front neck, K across 8 sts on safety pin at left front, and finally rib across the 9 sts at the top of the button band (113 sts).
Work 9 rows rib using 3.25 mm needles, 10 rows using 3.75 mm needles, and 10 rows with 4 mm needles. Cast off in rib using 4.5 mm needle.
Detail of the neck and collar

Finishing

Join bands to front neck using a flat seam. Catch bottom edge of button band to inside behind buttonhole band.
Attach sleeves to body, join sleeve and side seams.
Neaten buttonholes and attach buttons.
Do not press (if you have used different yarn, press according to ball band instructions). Press seams lightly under a dry cloth.
 

Sunday, 6 January 2013

Raspberry Ripple - Vintage-inspired top



Vintage-styled short-sleeved top with mitred neck

I made this for one of my daughters for Christmas. She’s into the fifties look, and has recently won an award for Best Vintage-Inspired Designer in Manchester (see Kally’s blog here), but she doesn’t knit so it’s something I can make that she can’t!
I used the same stitch pattern as for the Rainbow Ripple Hooded Jacket, but in 4-ply and with only one contrast colour.

Materials:

Back view of top
150g 4-ply yarn in main colour (black) and 100g in contrast (raspberry) – I used some of the Bramwell 100% acrylic coned yarn left over from my machine knitting days, but any yarn that knits to the correct tension will do.
1 pair 3 mm (UK 11) needles
1 pair 3.75 mm (UK 9) needles

Tension:

28 sts and 36 rows to 4 in/10 cm over pattern.

Measurements:

To fit size 42 to 44 in bust – actual measurements bust 40 in (unstretched), length 20 in, sleeve seam 4½ in.

Abbreviations: 

K      knit
P      purl
M1    make 1 st (pick up loop between 2 sts and knit into the back of it)
st st  stocking stitch
g st   garter stitch (every row K) 
patt  pattern
tog    together
st(s)  stitch(es)
inc    increase
dec   decrease
RS     right side
WS    wrong side
MC    main colour
CC    contrast colour
in      inch(es) 
Back:
Using MC and size 3 mm needles, cast on 119 sts. Work 3½ in K1, P1 rib.
Change to 3.75 mm needles and join in CC – do not cut MC yarn, just carry it up the side of your work, taking care not to pull it too tightly. Work as follows:
Inc row: K2, M1, (K5, M1) 23 times, K2 (143 sts). Work 3 further rows in CC, in st st.
Pattern row (RS): Using MC, K2tog twice, (K1, M1) 4 times, K1, K2tog twice. Repeat to end of row (13 st repeat)
Work 3 rows g st.
Using CC, work pattern row again, then st st 3 rows.
Continue in this manner, working 4 rows MC in g st then 4 rows CC in st st, the first row in each colour being the pattern row, until work measures 13 in.
Decrease for armholes: Keeping continuity of patt, cast off 9 sts at start of next 2 rows. Dec 1 st at each end of next 5 rows (115 sts).**
Dec 1 st at each end of 2nd and each alt row (RS rows) until 91 sts remain.
Work straight until work measures 6 in from start of armhole decreasing, ending with a fourth contrast row.
Shape neck: Patt 13, turn and patt 13 more rows on these 13 sts, thus ending at armhole edge.
Shape shoulder: Cast off 7 sts at start of next row. Patt 1 row. Cast off remaining 6 sts.
Place next 65 sts on stitch holder. Rejoin yarn to rem 13 sts and work 15 rows, thus ending at armhole edge. Shape shoulder as above.
Back neck: Using MC and 3.25 mm needles, with RS facing you, pick up and K 10 sts down right side of neck (right hand side on work), K across 65 sts from stitch holder, pick up and K 10 sts up other side of work (85 sts). K 1 row.
Continue to work neck as follows:
1st row:
K8,
K2tog, S1, K1, psso,
K61,
K2tog, S1, K1, psso,
K8.
(81 sts)
2nd and foll WS rows: K to end
3rd row:
K7,
K2tog, S1, K1, psso,
K59,
K2tog, S1, K1, psso,
K7.
(77 sts)
5th row:
K6,
K2tog, S1, K1, psso,
K57,
K2tog, S1, K1, psso,
K6.
(73 sts)
7th row:
K5,
K2tog, S1, K1, psso,
K55,
K2tog, S1, K1, psso,
K5.
(69 sts)
9th row:
K4,
K2tog, S1, K1, psso,
K53,
K2tog, S1, K1, psso,
K4.
(65 sts)
11th row:
K3,
K2tog, S1, K1, psso,
K51,
K2tog, S1, K1, psso,
K3.
(61 sts)
13th row:
K2,
K2tog, S1, K1, psso,
K49,
K2tog, S1, K1, psso,
K2.
(57 sts)
15th row:
K1,
K2tog, S1, K1, psso,
K47,
K2tog, S1, K1, psso,
K1.
(53 sts)
17th row:

K2tog, S1, K1, psso,
K45,
K2tog, S1, K1, psso,

(49 sts)
18th row: (WS) K2tog, K to last 2 sts, K2tog. Cast off remaining 47 sts fairly loosely.

Front:

Work as for back to **.
Dec 1 st at each end of 2nd and each alt row (RS rows) until 111 sts remain, ending with a WS row.
Divide for front neck: K2 tog, patt 21, turn leaving remaining 88 sts on needle. Working on these 22 sts, continue in patt, continuing to dec 1 st at armhole edge on each RS row until 13 sts remain. Continue straight until front is same length as back to shoulder cast off, cast off as for front.
Place next 65 sts on a stitch holder. Rejoin yarn to remaining 23 sts. Patt to last 2 sts, K2 tog.
Continue in patt as for other side of front neck, reversing all shapings.
Front neck: Using MC and 3.25 mm needles, with RS facing you, pick up and K 38 sts down left side of neck (right hand side on work), K across 65 sts from stitch holder, pick up and K 38 sts up other side of work (141 sts). K 1 row.
Continue to work neck as follows:
1st row:
K36,
K2tog, S1, K1, psso,
K61,
K2tog, S1, K1, psso,
K36.
(137 sts)
2nd and foll WS rows: K to end
3rd row:
K35,
K2tog, S1, K1, psso,
K59,
K2tog, S1, K1, psso,
K35.
(133 sts)
5th row:
K34,
K2tog, S1, K1, psso,
K57,
K2tog, S1, K1, psso,
K34.
(129 sts)
7th row:
K33,
K2tog, S1, K1, psso,
K55,
K2tog, S1, K1, psso,
K33.
(125 sts)
9th row:
K32,
K2tog, S1, K1, psso,
K53,
K2tog, S1, K1, psso,
K32.
(121 sts)
11th row:
K31,
K2tog, S1, K1, psso,
K51,
K2tog, S1, K1, psso,
K31.
(117 sts)
13th row:
K30,
K2tog, S1, K1, psso,
K49,
K2tog, S1, K1, psso,
K30.
(113 sts)
15th row:
K29,
K2tog, S1, K1, psso,
K47,
K2tog, S1, K1, psso,
K29.
(109 sts)
17th row:
K28,
K2tog, S1, K1, psso,
K45,
K2tog, S1, K1, psso,
K28.
(105 sts)
18th row: K to end.
Cast off fairly loosely, working double decreases at mitred corners in line with those already worked.

Sleeve (make 2):

Using MC and size 3 mm needles, cast on 87 sts. Work 1½ in K1, P1 rib.
Change to 3.75 mm needles and join in CC.
Inc row: K4, M1, (K5, M1) 16 times, K3 (104 sts). Work 3 further rows in CC, in st st.
Continue in patt as for back until work measures 4½ in from start.
Decrease for armholes: Keeping continuity of patt, cast off 9 sts at start of next 2 rows. Dec 1 st at each end of next row (RS) and following alt rows until 64 sts remain.
Dec 1 st at each end of next and following 4th rows (RS) until 50 sts remain, then every alt row until 34 sts remain, ending with a RS row.
Next row: (P2 tog) 17 times. Cast off remaining 17 sts.

To make up:

Do not press (if you have used different yarn, press according to ball band instructions).
Set in sleeves, then join sleeve and side seams. Sew ends into seams. Press seams lightly under a dry cloth.